Rmc 7150, 14” short depth rack server – Acnodes RMC 7150 User Manual

Page 9

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7150

14” short depth rack server

2.4 Installing the System into a Rack

This section provdes information on installing the RMC 7150 into a rack unit. If the sysetm has already been mounted into a

rack, you can skip ahead to sections 2-5 and 2-6.

Basic Installation Procedure

The RMC 7150 server comes with two rack mounting brackets, which are located on each side at the front of the chassis. To

mount the system into a rack, simply screw these brackets directly to the front of the rack (two screws for each bracket). As

figure 2-1 shows. The brackets can be located at the front of the chassis or moved approximately one-third to the rear of the

chassis.