Rmc 7150, 14” short depth rack server – Acnodes RMC 7150 User Manual

Page 37

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7150

14” short depth rack server

LAN1/LAN2 Enable/Disable

Change the setting or jumper JPL1 to enable or disable the

LAN1 port and JPL2 to enable or disable the LAN2 port on

the serverboard. See the table on the right for jumper set-

tings. The default setting is enabled.

Watch Dog

JWD enables the Watch Dog Function, a system monitor

that takes action when a software applications freezes the

system. Jumping pins 1-2 will have WD reboot the system if

a program frerezes. Jumping pins 2-3 will generate a non-

maskable interrupy for the program that has frozen. See the

table on the right for jumper settings.

I2C Bus to PCI/PCI-Exp. Slots

Jumpers JIC2 allow you to connect the system management

bus to the PCI and PCI-E slots. The defauly setting is open

(Disabled). Both jumpers must be set to the same setting.

See the table on the right for jumper settings.