Rmc 7150, 14” short depth rack server – Acnodes RMC 7150 User Manual
Page 65
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7150
14” short depth rack server
65
Appendix B Installing Windows
After all hardware components have been installed, you must first configure Intel South Bridge RAID Settings before you install
the Windows OS and other software drivers. To configure RAID settings, please refer to RAID Configuration User Guides posted
on our website a.
B-1
Installing Windows to a RAID System
1. Insert Microsoft's Windows Setup CD in the CD drive and the system will start booting up from CD.
2. Press the
3. When the Windows setup screen appears, press "S" to specify additional device(s).
4. Insert the driver diskette "Intel AA RAID XP/2003/2008/Vista Driver for ICH10R" into the floppy drive and press the
key.
5. Choose the Intel(R) ICH10R SATA RAID Controller from the list indicated in the Windows setup screen, and press the
6. Press the
it at this time.) Once all devices are specified, press the
7. From the Windows OS setup screen, press the
then continue the installation.
8. After the Windows installation is completed, the system will automatically reboot.
B-2
Installing Windows to a Non-RAID System
1. Insert Microsoft's Windows setup CD in the CD drive and the system will start booting up from CD.
2. Continue with the OS installation. The Windows OS Setup screen will display.
3. From the Windows setup screen, press the
then continue with the installation.
4. After the Windows installation is complete, the system will automatically reboot.
5. Insert the Supermicro setup CD that came with your motherboard into the CD drive during system boot, and the main
screen will display.