Rmc 7150, 14” short depth rack server – Acnodes RMC 7150 User Manual

Page 33

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7150

14” short depth rack server

Universal Serial Bus (USB)

There are two Universal Serial Bus ports

located on the I/O panel and five additional

USB headers located on the serverboard.

The headers labeled USB 2/3 and USB 4/5

can be used to provide front side USB acc

ess (cables not included). USB 6 is an A

type. See the tables on the right for pin

definitions.

Serial Ports

Two serial ports are included on the

serverboard: COM1 is a port located

beside the USB ports and COM2 is

a header located on the corener of the

board near the SIMLC. See the table

on the right for pin definitions.

Wake-On-LAN

The Wake-On-LAN header is des-

ignated JWOL on the serverboard.

See the table on the right for pin

definitons. You must enable the LAN

Wak-Up setting in BIOS to use the

function. (You must also have LAN

card with a Wake-On-LAN connector

and cable to use this feature.)