Pc 5150, Rmc 7150 – Acnodes RMC 7150 User Manual
Page 66
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
66
RMC 7150
14” short depth rack server
Appendix C System Specifications
Processors
Two Intel® 5500 Series processors in LGA1366 sockets
Chipset
Intel 5500/ICH10R
BIOS
32 Mb AMI SPI Flash ROM
Memory Capacity
Six DIMM slots that can support up to 24 GB of ECC
registered DDR3- 1333/1066/800 SDRAM
Serial ATA Controller
Intel ICH10R on-chip controller to support six 3 Gb/s
Serial ATA (RAID 0, 1)
Drive Bays
One internal SATA hard drive. The internal drive is not
hot-swappable.
PCI Expansion
One PCI-Express card (with pre-installed riser card)
Serverboard
Dimensions: 12 x 10 in (305 x 254 mm)
Chassis
Mini 1U Rackmount
Dimensions: (WxHxD)
17.3 x 1.7 x 14.5 in. (439 x 43 x 368 mm)
Weight
Gross Weight: 18 lbs. (8.2 kg.)
System Cooling
Three (3) 4-cm counter-rotating fans
System Input Requirements
AC Input Voltage: 100-240 VAC
Rated Input Current: 7A ~ 3A max. (100-240V) Rated
Input Frequency: 50 to 60 Hz
Power Supply
Rated Output Power: 520W (Part# PWS-521-1H)
Rated Output Voltages: +3.3V (16A), +5V (20A),
+12V (39A), -12V (0.5A), +5Vsb (3A)
Operating Environment
Operating Temperature: 0º to 35º C (32º to 95º F)
Non-operating Temperature: -40º to 70º C (-40º to
158º F) Operating Relative Humidity: 20% to 95%
(non-condensing) Non-operating Relative Humidity: 5
to 95% (non-condensing)
Regulatory Compliance
Electromagnetic Emissions: FCC Class A, EN 55022
Class A, EN 61000-3-2/-3-3, CISPR 22 Class A