Pc 5150, Rmc 7150 – Acnodes RMC 7150 User Manual
Page 40
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
40
RMC 7150
14” short depth rack server
Chapter 6
Advanced Chassis Setup
This chapter covers the steps required to install components and perform mainte- nance on the SC512F-520B chassis. For
component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps
are unnecessary, skip ahead to the step that follows.
Tools Required: The only tool you will need to install components and perform maintainance is a Philips screwdriver.
6-1
Static-Sensitive Devices
Electrostatic discharge (ESD) can damage electronic components. To prevent damage to any printed circuit boards
(PCBs), it is important to handle them very carefully.
The following measures are generally sufficient to protect your equipment from
ESD damage.
Precautions
o Use a grounded wrist strap designed to prevent static discharge.
o Touch a grounded metal object before removing any board from its antistatic bag.
o Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts.
o When handling chips or modules, avoid touching their pins.
o Put the serverboard, add-on cards and peripherals back into their antistatic bags when not in use.
o For grounding purposes, make sure your computer chassis provides excellent conductivity between the power
supply, the case, the mounting fasteners and the serverboard.
Unpacking
The serverboard is shipped in antistatic packaging to avoid static damage. When unpacking the board, make sure the person
handling it is static protected.