Telenav for Cincinnati Bell Supported Devices: v5.5 Lite for Symbian phones - Manual (Page 15)

To use the Drive To menu, do the following steps:
1. Select “Drive To” from the TeleNav GPS Navigator Main Menu.
2. Select one of the following options from the Drive To menu as shown
in the illustration to the right and discussed below.
Resume Trip
This option appears if you have previously interrupted a navigation session.
Your destination and route settings are saved if you exit navigation while
on a route so that you may easily resume the trip later. The settings for a
paused trip will clear if you begin a new route.
© TELENAV, INC. 2003-2009 PAGE 15 OF 59