Telenav for T-Mobile Supported Devices: v6.0 for BlackBerry smartphones - Manual (Page 14)

3. Find the device name in the Select Device results list. You may need to follow the pairing instructions and
provide a password if asked, depending on your specific Bluetooth device.
4. Once the device is paired, launch TeleNav GPS Navigator (Menu >> Downloads >> TeleNav).
5. Make sure your Bluetooth device is powered ON. Then choose a destination in the Drive To menu.
6. Once you are on the navigation screen, press the Speaker key on the BlackBerry. Audio will now be
routed through your Bluetooth headset.
NOTE: If your Bluetooth headset is off, you will see a pop-up reminding you to turn it on. You should see a small
Bluetooth icon in the upper-left corner of the screen indicating that audio is being routed to the headset. Press the
Speaker key again on the navigation screen to toggle off the Bluetooth mode.
If you exit the TeleNav GPS Navigator application, you will need to toggle Bluetooth back on when you return to the
navigation screen.
10. Main Menu
The TeleNav GPS Navigator Main Menu (referred to in this User’s Guide
as “Main Menu”) contains these options:
 Drive
To
 Search
 Maps & Traffic
 Local
Apps
You can return to the Main Menu choosing Menu >> Home from
elsewhere within TeleNav GPS Navigator. This will save you on the
amount of clicks it would take to get to the Main Menu by pressing
Escape.
11. Drive To Menu
You can select a variety of ways to get driving directions to a destination.
TIP: Coaching for each screen is available using the Menu >> Help
selection.
The Drive To Menu options are:
 Resume Trip – This option appears if your last navigation
session was interrupted before you arrived at your
destination. Choose “Resume” to navigate to the destination
© TELENAV, INC. 2003-2010 PAGE 14 OF 58