ididit Retrofit Steering Column: 1970-74 Cuda/Challenger - Manual (Page 9)

(Figure 18)
(Figure 19)
2. Install the 9/16 nut and torque to 40 FT. LBS.
3. Install the horn wire by aligning the catch pin and push in, then turn 1/8 of a turn
clockwise. (See Figure 16)
4. Now use the three provided bolts to install the
wheel. (See Figure 17)
6. Now connect the wire to the electrical tab, and
finally push the button over the contact. (See Fig-
ure 18)
(Figure 16)
5. Use the original three screws that held the horn
mechanism in place to re-secure it.
(Figure 17)
Aftermarket Replacement Wheels
If using the Grant Tuff Grip aftermarket replacement wheel, with our adaptor. You
will need these additional parts for your horn to work properly. (See Figure 19) We
have a kit that includes all of these components. Kit part number is: 2611010010
If you have any questions about installation you can call our tech line and we will be
happy to walk you through any of the processes. (517)424-0577
8