ididit Retrofit Steering Column: 1970-74 Cuda/Challenger - Manual (Page 10)

Rack & Pinion Tech Note:
On a personal note, this rack kit is great. It bolts in, it Fits, and it includes every little
detail that others forget. (Photo 20)
Other rack kits should have similar requirements. The use of the telescoping shaft
on the column should cure any length issues. And the ¾ DD shaft makes attaching
a joint a breeze.
9
We installed a UNISTEER kit into the
test car. This column required no
modifications. There was no cutting
necessary due to the slip in the lower shaft of the column. It will how ever be neces-
sary to make sure the joint that attaches to the column is a ¾ DD joint.