ididit Retrofit Steering Column: 1970-74 Cuda/Challenger - Manual (Page 7)

Electrical:
Please see pack “B” for wiring instructions.
Note: There are up to 3 wires on the ignition plug that may not have a mate. These
wires were for key buzzer and shift indicator. The wiring of the ididit column does
not support these features. The wires are however insulated and should be pro-
tected in the connector.
Testing
Install the key and now we can check the circuits.
One click back counter clock wise and the accessories should come on (radio, heat-
er blower, ect.).
Now turn two clicks forward, this should have the accessories on and the ignition
system on (coil or electronic ignition has power).
OK this is it!! Check that the vehicle isn’t in gear!!! Now go to crank position. (Starter
should engage) and vehicle should start.
6