ididit Retrofit Steering Column: 1968 Chrysler B-Body Adaptor Plug User Manual
68 chrysler b-body adaptor plug
ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI • PH: 517-424-0577 • FAX: 517-424-7293 • ididitinc.com
Instruction #: 8000020130
Revised 10/12
68 Chrysler B-Body Adaptor Plug
This wiring adaptor is designed to make the column a simple plug and play item. Simply plug the column side
into the matching connector and then plug the dash side into the other connector.
Please note that the ididit column comes equipped with emergency flashers. Your vehicle was originally
designed with this switch located on the dash. We have included a loose
brown wire and connector set with
the 68 Chrysler B-Body wire adaptor so the dash emergency flasher function could be moved to the column.
If you do not wish to change the emergency flasher location simply leave the
brown wire disconnected. The
wire is insulated therefore there shouldn’t be any issues with it.
If you do wish to use the converted column switch, simply remove the
red feed wire on the flasher switch and
attach it to our connector. This can be accomplished by creating a short jumper with the supplied terminal and
connector to connect the loose
brown wire on this adaptor. Once the brown wire is plugged in, the switch on
the column will now control the emergency flashers.