Steering wheels – ididit Retrofit Steering Column: 1962-66 Nova User Manual

Page 12

Steering wheels:

Torque Steering Wheel Nut to 45ft LBS

Aftermarket Wheels:

This column is designed to accept GM steering wheels from

passenger cars manufactured from 1969 to the late 1980’s (Pre

airbag). Steering wheel Adaptors for most aftermarket wheels are

available through ididit.

OEM Wheels:

Due to the column diameter, OEM

wheels for this car will not match

perfectly. The spline and tapper are

correct but these wheels need an

adaptor ring to match the column

perfectly, and also need a new hole

for the horn wire drilled in the wheel.

This kit (Figure 13) and instructions

are available and it is part # 2612100040

Need Further Assistance?

ididit, inc has been serving the rodding community for over 25 years

and we take pride in our outstanding customer service. If you need

further assistance, feel free to call us at (517)424-0577, Monday-

Friday from 8:30 am - 5:30 pm and Saturday 10:00 am - 2 pm EST.

You can also email us at [email protected].

(Figure 13)

No part of this guide may be reprinted, reproduced or utilized in

any form without the express written permission of ididit, inc.

2012 ididit, inc.

Printed in the USA

ididit,

inc.

610 S. Maumee St., Tecumseh, MI 49286

(517) 424-0577 • (517) 424-7293 fax