ididit Retrofit Steering Column: Tri-Five Chevy - Manual (Page 5)

4
Wiring your Column
This ididit steering column uses a standard 3 7/8-inch male connect. However,
some GM columns use a 4 ¼-inch male connector. Connectors do not inter-
change and must be used in pairs. A mate to the 3 7/8 inch plug is available
through ididit. If you need to change this connector for any reason the follow-
ing schematic will be helpful.
If you have an Original Wiring Harness and you want 4-way flashers
this information is for you!
All Tri-Five wiring systems are different and each one has different set of plugs.
We have kits available for each year. Follow the specific wiring schematics for
each 4-way kit instructions.
If you have a 1955 Chevy (PN # 3100035775)
The picture to the right depicts what the wire
harness will look like.
If you have a 1956 Chevy (PN # 3100035780)
The picture to the right depicts what the wire
harness will look like.
If you have a 1957 Chevy (PN # 3100035785)
The picture to the right depicts what the wire
harness will look like.
If you have an aftermarket wire harness the 4-way flashers
should already be integrated in the new wiring system.