ididit Retrofit Steering Column: Tri-Five Chevy - Manual (Page 16)

15
Think you may have forgotten something?
Here’s what you may have missed:
Add Ons: (Add Ons should be installed on the column prior to shipment)
 Cruise Control: Carbureted Engine or Fuel Injected Engine?

Dimmer or Wiper: Dimmer/Wiper Kits will replace the original knobs and
levers that come standard on an ididit column. This is a replacement lever
with a push button at the end of the knob. The Dimmer/Wiper kit when pushed
is either On or Off. Includes relay kit.
Accessories:
 Steering Wheel: We cannot recommend any brand of wheel because there
are so many to choose from. If you are having a hard time figuring out if
a wheel you had purchased will work with an adaptor or an ididit column,
simply give us a call.
 Steering Wheel Adaptor: Unless using original 1969 & Up Steering
Wheel you will need an adaptor. The adaptor may depend on the wheel. ididit
recommends purchasing the Steering Wheel prior to purchasing the adaptor. 3,
5, 6 or 9-Bolt Adaptors are Available with finishes of Chrome, Black Powder
Coated, Brushed or Polished Aluminum. The adaptors are available with or
without Horn Buttons.

Floor Mount: Like the under dash mount this piece is very necessary when
installing your steering column safely. ididit offers a Classic Floor Mount,
Swivel Ball Floor Mount, Adjustable Floor Mount with or without a trim
piece. Available for any ididit Steering Column.

Shift Indicator: Shift indicators available are 3 or 4-speed transmissions.
ididit also carries shift indicators for Ford AOD & AODE transmissions. The
indicators are acrylic and can be ordered with or without the housing. The
housing finishes include: Chrome, Black Powder Coated, Brushed or Polished
Aluminum.

Accessory Knobs for Levers or Dash: Deco or Retro knobs are available
to replace the standard knobs that come standard on the column or if you plan
on matching those knobs to your dash knobs. Deco knobs are only available
in Polished Aluminum. Standard and Retro Knobs are available in Chrome,
Black Powder Coated, Brushed or Polished Aluminum.

Cable Shift Linkage Kit: Kits are not available for the 1955-57 Chevy
unless a Rack & Pinion is used and the column is length at least 2”.