8 memory subsystem, Memory:snsr:cf, Memory:snsr:cwrg – Boonton 4240 RF Power Meter User Manual
Page 80: Memory:snsr:info, Memory:sys:load, Memory:sys:store, 8 memory subsystem -20, Memory:snsr:cf? -20, Memory:snsr:cwrg? -20, Memory:snsr:info? -20
Boonton 4240 Series RF Power Meter
5.5.8 MEMory Subsystem
is used to save and recall instrument operating configurations, and to edit and review user-
pplied f
pende
path. Up to ten configurations may be
saved, a
ency
g a stored FDOF table to a particular
measure
nel is no
NSe subsystem.
EMory:SNSR:CF?
Description:
Return the sensor frequency cal-factor table.
Syntax:
MEMory:SNSR[1|2]:CF?
Argument:
None, query only.
:SNSR:CWRG?
Description:
Return sensor AC cal data.
Syntax:
MEMory:SNSR[1|2]:CWRG?
Argument:
None, query only.
MEMory:SNSR:INFO?
Description:
Return the sensor ID and parameter data.
Syntax:
MEMory:SNSR[1|2]:INFO?
Argument:
None
MEMory:SYS:LOAD
Description:
Recall a previously stored configuration of an instrument setup.
Syntax:
MEMory:SYS:LOAD
Argument:
Alphanumeric filename, "USER0" thru "USER10"
MEMory:SYS:STORe
Description:
Save the configuration of the current instrument setup.
Syntax:
MEMory:SYS:STORe
Argument:
Alphanumeric filename, "USER1" thru "USER10"
The MEMory group of commands
su
requency de
nt offset (FDOF) tables for external devices in the signal
nd two frequ
dependent offset tables. Note, however that assignin
ment chan
t a MEMory command; it is handled through the SE
M
MEMory
Remote Operation
5-20