Boonton 4240 RF Power Meter - Manual (Page 16)

Boonton 4240 Series RF Power Meter
Option designations are appended to the instrument’s base model number. For example, Model 4242-01-
nel instrum calibrator connectors all on the rear panel.
configurations h ber.
.6 Specifications
erformance specifications for the 4240 Series are listed in Table 1-2.
ecifications for all Boonton power sensors are found in the Boonton Sensor Manual, which
ay be ordered as Boonton p/n 98501900x* (x* - denotes revision level).
1-2 4240 Series Performance Specifications
(Specific tice)
PUTS
en y Range:
n
Powe ta adapter and is compatible with all Boonton
Dyna ode sensors; up to 50 dB with thermal sensors
EATURES
dBuW, dBnW, dBr, %
isplay Resolution 0.001 dB or 5 digits (in Watts mode)
-99.99 dB to +99.99 dB in 0.01 dB steps
imiting Individual high and low limit thresholds, -99.99 dB to +99.99 dB
Ranging
Filtering
ors:
rements
02 would be a two-chan ent with sensor and
Specials. Custom
ave –S/n appended to the model number, where n is a unique num
1
P
Performance sp
m
Table
ations are subject to change without no
SENSOR IN
RF Frequ c
1 MHz to 110 GHz 1
Power Ra ge: -70 to +44 dBm
1
r Sensors: Accepts sensor da
diode and thermal sensors
mic Range: Up to 90 dB with di
( 1 Sensor dependant )
F
Display Menu-driven 20 character x 4 line LCD
isplay Units MW, kW, W, mW, µW, nW, dBW, dBm, D
D
Display Offset
L
Peak Power Mode
Programmable duty cycle from 0.01 to 100.00% in 0.01 steps
Manual (7 ranges) or autoranging
Filter times to 20.00 seconds in 0.05 second increments
Automatic function;
Zeroing calculates, stores, and applies zero corrections to
each range
High Frequency Cal Fact +3 dB to -3 dB in 0.01 dB steps; cal factors also stored in sensor
data adapter.
Reference Level -99.99 dB to +99.99 dB in 0.01 dB steps for dBr measu
may be express in % in linear mode.
General Information
1-6