BMR Suspension SP029 - Manual (Page 3)

SP027 CONTINUED
21. Re-connect the sway bar end links and tighten.
22. Install the wheels/tires and lower vehicle.
23. Drive the car 10-15 miles to settle the springs.
Lowering the car will create negative camber in the
front of the vehicle. It is important to get the car to an
alignment shop as soon as possible to prevent irregular
tire wear.
Align the vehicle to the following BMR recommended specifications:
CAMBER:
-1 to -1.25 degrees
CASTER: 3 to 4 degrees
TOE: 1/16” to 3/32” toe-in
WWW.BMRSUSPENSION.COM
This product is an aftermarket accessory and not designed by the vehicles manufacturer for use on this vehicle. As such,
buyer assumes all risk of any damage caused to vehicle/person during installation or use of this product.