BMR Suspension SP012 - Manual (Page 4)

LOWERING SPRINGS FOR 2005-PRESENT FORD MUSTANG (Cont.)
Part #’s SP009, SP011, SP012
Rear Installation:
1. Lift vehicle and support with jack stands.
2. Place a hydraulic jack under the differential.
3. Remove both rear wheel and tire assemblies.
4. Using an 18mm socket, remove the lower shock bolt. See IMAGE 1 for reference.
5. Lower the rear end until the rear springs can be removed.
6. Insert the BMR springs making sure to retain the OE spring isolators.
7. Lift the rear end and insert the lower shock bolts. Do not tighten at this time.
8. Re-install the wheels/tires.
BMR recommends the following alignment specs:
STREET PERFORMANCE PRO PERFORMANCE
Camber: -0.75 degrees +/- .75 degrees Front camber: -1.0 degrees +/- .75 degrees
Front caster: 7.1 (OE not adjustable) Front caster: 7.1 (OE not adjustable)
Toe: 0 to -1/16” max Toe: 0 to -1/16” max
WWW.BMRSUSPENSION.COM
This product is an aftermarket accessory and not designed by the vehicles manufacturer for use on this vehicle. As such, buyer
assumes all risk of any damage caused to vehicle/person during installation or use of this product.