BMR Suspension BK024 User Manual
Page 2
BK024 (Continued)
6. Un-plug the fuel pump wiring harness located on the passenger side of the car next to the front cradle
bushing. See Image 4 on previous page.
7. Twist the rubber brake line while pulling up to “release” it from the bracket attached to the upper
control arm on each side. Image 5 below.
8. Using an 18mm socket or wrench, remove the (2) bolts that hold the caliper to the spindle (Image 6).
Remove the caliper and tie it up out of the way with a zip tie.
9. Using Image 7 above as a guide, locate and unplug the ABS plug located above the rear cradle.
10.
Detach the emergency brake cables from the spindles. (Image 8)
See also other documents in the category BMR Suspension For the car:
- AA016 (2 pages)
- AA017 (1 page)
- AA018 (3 pages)
- AA028 (1 page)
- AA005 (3 pages)
- BCA005 (1 page)
- BK043 (2 pages)
- CCK002 (3 pages)
- RB001 (2 pages)
- RSK001 (1 page)
- RSK007 (2 pages)
- SB035 (3 pages)
- BCA003 (1 page)
- XSB006 (1 page)
- DSL002 (2 pages)
- TCA007 (1 page)
- AWK-1 (1 page)
- PSB001 (1 page)
- TCA018 (1 page)
- BCK003 (4 pages)
- BK046 (4 pages)
- BK006 (1 page)
- BK008 (1 page)
- BK016 (3 pages)
- BK017 (4 pages)
- BK018 (2 pages)
- BK019 (1 page)
- BK026 (4 pages)
- BK027 (5 pages)
- BK029 (4 pages)
- BK039 (4 pages)
- BK040 (3 pages)
- CCK004 (2 pages)
- DSL014 (2 pages)
- DSL015 (1 page)
- DTB004 (1 page)
- ELK004 (1 page)
- ELK005 (1 page)
- ELK006 (1 page)
- ELK009 (1 page)
- ELK011 (1 page)
- MM004 (2 pages)
- MTCA030 (2 pages)
- S5003 (4 pages)