AirSep MN138-1 H - Manual (Page 9)

3
MN138-1 Rev H
02/14
Symbol Description Symbol Description
Consult the accompanying
documents
Keep unit and accessories dry
Use no oil or grease
Proper disposal of waste of electrical
and electronic equipment required
Oxygen outlet connection to the
cannula
Do not expose to open flames
Caution: Federal law (USA)
restricts this for sale or rental by
or on the order of a physician or
licensed health care provider.
Keep in the vertical position
Fragile – handle with care
Oxygen concentration warning LED
See Instructions
Method disposing of waste: All waste from the VisionAire (patient circuit, etc.) must be disposed of
using appropriate methods.
Method for disposing of the device: In order to preserve the environment, the concentrator must only
be disposed of using the appropriate methods.
Conformity with EN 60-601 (§ 6.8.2 b):
“The manufacturer, assembler, installer or importer is not considered to be responsible themselves for
the consequences on the safety, reliability and characteristics of a device unless:
- The assembly, fitting, extensions, adjustments, modifications or repairs have been performed by
persons authorized by the party in question.
- The electrical installation of the corresponding premises complies with IEC regulations.
- The device is used in accordance with the instructions for use.” If the replacement parts used for the
periodic servicing by an approved technician do not comply with the manufacturer’s specifications, the
latter is absolved from all responsibility in the event of
an accident. Do not open the device while in operation: risk of electrical shock. This device complies
with the requirements of the 93/42/EEC European directive but its operation may be affected by other
devices being used close by, such as diathermy and high frequency electro-surgical equipment,
defibrillators, short wave therapy equipment, mobile telephones, CB and other portable devices,
microwave ovens, induction plates or even remote control toys and more generally electromagnetic
interferences which exceed the levels specified by the EN 60601-1-2 standard.