AirSep MN137-1 D - Manual (Page 75)

VisionAire™ EN
AirSep ® Corporation EN-9
MN137-1 rev. D
2.0 Concentrator Components
Review the figures below and become familiar with the important parts
of your VisionAire Oxygen Concentrator.
2.1 Front of Concentrator
Figure 1
Figure 1a
Oxygen Outlet
Low Oxygen
Concentration
Indicator
(optional – mandated for
EU and specific countries)
Top Handle
Specification
Label
Flowmeter
Adjustment
Knob
Hour Meter
Side Handles
Circuit Breaker
Reset Button
ON/OFF (I/0)
Power Switch
Operating
Instructions
Label
Caster(s)
EN VisionAire™
EN-10 AirSep ® Corporation
MN137-1 rev. D
Ø Top and Side Handles:
o Enables convenience in carrying the unit.
Ø On/Off (I/0) Power Switch:
o Starts and stops the operation of the unit.
Ø Oxygen Outlet
o Provides connection for a humidifier (if required) or cannula.
Ø Circuit Breaker Reset Button:
o Resets the unit after electrical overload shutdown
Ø Flowmeter Adjustment Knob:
o Controls the oxygen flow rate in liters per minute (LPM).
Ø Low Oxygen Concentration Indicator (optional – mandated for EU
and specific countries)
o When equipped with an Oxygen Monitor – a warning LED
(amber) is activated on the front panel (see Section 2.6 ‘ Safety
Features’ for details)
Ø Hour Meter:
o Records the concentrator’s cumulative hours of operation.
Ø Operating Instructions Label:
o Directs usage of the unit.
Ø Casters:
o Four casters enable unit to be easily moved, as needed.
Ø Specification Label:
o Displays electrical specifications and serial number.