Alpine IVA-C801 - Manual (Page 67)

65
-EN
1 Remote Output Terminal
2 System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When
no device is connected, leave the switch in the NORM
position.
NOTE
Be sure to turn the power off to the unit before changing
the switch position.
3 AUX Audio Input (AUX1) Terminals
4 AUX Audio/Video Input (AUX2) Terminals
5
AUX Video Input (AUX1) Terminal
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
6 RGB Input Terminal
Connect this to the RGB output terminal of the Naviga-
tion System.
7 AUX Output Terminal
Use when connecting an optional monitor etc.
8 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
9 Rear/Front Input Terminal
Use when connecting an amplifier/equalizer.
0 Subwoofer Input Terminal
Connect the output lead of an amplifier for the
subwoofer to this terminal.
!
RGB Cable (Included with NVE-N852, not included
with NVE-N871A)
@ Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This
lead outputs the controlling signals from the remote
control.
# RCA Extension Cable (Included with DVD video
player)
$ Ai-NET Cable (Included with DVD video player)
% Ai-NET Cable (Included with Equalizer)
^ RCA Extension Cable (Sold separately)
& Front Output RCA Connectors
* Rear Output RCA Connectors
( Ai-NET Cable (Included with CD Changer)
) RCA Extension Cable (Included with DVD Changer)
⁄ Ai-NET Cable (Included with DVD Changer)
¤ RGB Convertor Cable (KWE-503N) (Sold Sepa-
rately)