Alpine IVA-C801 - Manual (Page 10)

8
-EN
Basic Operation
Using Face Cover
An anti-theft face cover is provided with the
IVA-C801/CVA-1006.
Put the face cover onto the IVA-C801/CVA-1006
when you leave the vehicle.
Be sure to remove the anti-theft face cover when you
drive.
• Compatibility with Factory Steering Wheel
Radio Controls
If your vehicle has steering wheel controls for
the radio, an optional steering wheel control
interface may be available to connect to your
Alpine radio. For details, contact your Alpine
dealer.
Raising the Monitor
1
Press the OPEN/CLOSE button.
The unit beeps 3 times and raises the monitor
automatically.
NOTES
• The IVA-C801/CVA-1006 is a precision device. With
gentle handling, its unique capabilities can be enjoyed
for a long time.
• If the monitor touches an obstacle while it is being
raised, the unit will stop raising the monitor
immediately. Should this occur, remove the obstacle
and press the OPEN/CLOSE button again to lower the
monitor.
• When the movable monitor is opened, do not place any
object on the monitor and be careful not to bump or
apply any pressure to the monitor while it is open. This
can cause damage to the mechanism.
• Under low ambient temperature conditions, the
display may be dark for a short period of time
immediately after the power is turned on. Once the
LCD has warmed up, the display will return to
normal.
• For your safety, some operation of the unit cannot be
performed while the vehicle is in motion. In this case,
first stop the vehicle and engage the parking brake,
then perform the operation.
• Operation of the remote control (described on pages
52-53) can be carried out even while the monitor
screen is closed.
Initial System Start-UP
1
Immediately after installing or applying power to
the unit, it should be initialized. Press the
RESET
switch with a ball-point pen or any other pointed
object.
RESET
switch
RESET
switch
OPEN/CLOSE PWR OPEN/CLOSE PWR
(IVA-C801) (CVA-1006)
(IVA-C801)
(CVA-1006)
and and