Alpine IVA-C801 - Manual (Page 29)

27
-EN
Audio Processor Operation (Optional)
Selecting Factory (Maker's)
Equalization Presets
If an optional Alpine Equalizer is connected to the
IVA-C801/CVA-1006, the Equalizer can be
controlled from the IVA-C801/CVA-1006.
Six equalization curves are preset on the
Equalizer at the factory.
1
Press the SOURCE button.
The main menu screen appears on the display.
2
Press the 4 (A.PROC) button to display the list
of the Audio Processors (A.PROC).
3
Rotate the rotary encoder and select "Equalizer."
Then press the rotary encoder to execute the
selection.
The display changes to the Equalizer mode
screen.
4
Select a desired Equalizer characteristic curve
and press the corresponding
Function button
( 1 (FLAT) through 6 (NEWS)).
You can select your desired equalizer
characteristic curve from 6 preset characteristic
curves; FLAT, MALE, FEMALE, POPS, ROCK
and NEWS.
5
When you have selected your desired
characteristic curve, press the
FUNC (RETURN).
The display returns to the Audio Processor List
screen.
Rotary encoder
Rotary encoder
(IVA-C801)
(CVA-1006)
SOURCE
SOURCE Rotary encoder
Rotary encoder
FUNC FUNC 4 4
Function buttons
(1 through 6) Function buttons
(1 through 6)
NOTE
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
Tip
In the equalizer mode, for example, you can horizontally
scroll each of the mode screens by rotating the rotary
encoder to the left or right. You can also adjust the
volume level by pressing and rotating the rotary encoder
(DHE, Surround, BBE, listening position, time collection
mode main screen only).