Alpine IVA-C801 - Manual (Page 54)

52
-EN
Remote Control Operation
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programed into the
radio's presets as shown below.
→ 1 → 2 ... 6
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending order.
Tape Mode: Press this button to advance to the
beginning of the next selection.
8 g Button
Radio mode: SEEK (DN) Button
CD/CD Changer mode: Press the button to go
back to the beginning of the current track.
Tape Mode: Press this button to rewind the tape.
Audio Processor Mode:
• When the main menu is displayed:
After pressing the A.PROC button, tilt the
button to select the factory preset curves in the
selected mode.
• When the adjustment mode screen is displayed:
Tilt to select the personal preset curves.
9 f Button
Radio mode: SEEK (UP) Button
CD/CD Changer mode: Press the button to
advance to the beginning of the next track.
Tape Mode: Press to fast forward the tape.
Audio Processor Mode:
• When the main menu is displayed:
After pressing the A.PROC button, tilt the
button to select the factory preset curves in the
selected mode.
• When the adjustment mode screen is displayed:
Tilt to select the personal preset curves.
! 9 Button
Radio mode: Pressing the button will select, in
descending order, stations programed into the
radio's presets as shown below.
→ 6 → 5 ... 1
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
Tape Mode: Press this button to return to the
beginning of the current selection or a selection
further back.
" Mute Button
• Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
• Press the button for at least 2 seconds to raise
the monitor. Press the button again to lower the
monitor.
# Audio Processor Button ∗∗
Press the button to call the external audio
processor mode.
∗
∗
For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
∗∗
This button is used in conjunction with an optional Ai-
NET processor.
1
2
3
4
#
!
9
"
6
5
7
8
Controls on Remote Control
1 Power Button
Press the button to turn the power on/off.
2 Source Button
Press to select the audio source.
3 - / J Button
Press and hold this button for at least 2 seconds to
play or pause (In CD/MD/TAPE/Changer mode).
Enter Button
• Press to execute the selection. (The same
function as the rotary encoder on IVA-C801/
CVA-1006.)
• Pressing and holding this button for at least 2
seconds turns the loudness on or off (when
neither an equalizer nor a digital sound
processor is connected).
4 ANGLE 89 Buttons
Press the button to adjust the angle of the
movable display.
5 Band/Program Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
→ FM1 → FM2 → AM
Changer mode: BAND Button
Switches changers (when a Multi-Changer
Switching device is connected).
TAPE mode: PROG Button
Press the button to change between the A and B
side of the tape.
6 Volume Adjustment Buttons
To increase the volume level:
Press the
L
button
To decrease the volume level:
Press the
K
button
The buttons have the same functions as rotating
the rotary encoder on IVA-C801/CVA-1006.