Other useful features, Sound (beep) guide function, Demonstration – Alpine IVA-C801 User Manual
Page 48
46
-EN
Other Useful Features
Sound (Beep) Guide Function
This function will give audible feedback with
varying tones depending upon the button
pressed.
NOTE
After carrying out the steps 1 to 3 of "To display the Setup
mode screen" described on page 40, perform the
operation show below.
1
Press the
SOURCE
button.
The main menu appears on the display.
2
Press the
6
(SETUP) button.
The Setup mode screen appears.
3
Rotate the rotary encoder and select "BEEP."
The Function Guide is displayed.
4
Press the
2
(ON) button to activate the Sound
Guide mode. The display shows "BEEP ON."
Press the
1
(OFF) button to deactivate the
Sound Guide mode. The sound guide beep will
not be produced when a button on the unit is
pressed.
5
When the setting has been completed, press the
FUNC
(RETURN) button.
The display returns to the main menu screen.
NOTE
Immediately after inputting titles or changing the settings
of Setup Mode or Display Mode (While the system is
inputting the titles or data automatically) do not turn the
ignition key (engine key) to OFF.
Otherwise, the title may not be written, or the settings
may not be changed.
Demonstration
In the Demonstration mode, the unit performs
scanning of the basic operation of each source.
NOTE
After carrying out the steps 1 to 3 of "To display the Setup
mode screen" described on page 40, perform the
operation show below.
1
Press the
SOURCE
button.
The main menu appears on the display.
2
Press the
6
(SETUP) button.
The Setup mode screen appears.
3
Rotate the rotary encoder and select "DEMO" to
activate the Demonstration Selection mode.
The display shows the Function Guide screen.
4
Press the
2
(ON) button to activate the
Demonstration mode. When the Demonstration
mode is activated, the unit automatically starts
the demonstration (simulation). The
demonstration continues until the demonstration
mode is deactivated.
To deactivate the demonstration mode, press the
1
(OFF) button. The demonstration stops.
NOTE
Immediately after inputting titles or changing the settings
of Setup Mode or Display Mode (While the system is
inputting the titles or data automatically) do not turn the
ignition key (engine key) to OFF.
Otherwise, the title may not be written, or the settings
may not be changed.
(IVA-C801)
(CVA-1006)
Rotary encoder
Rotary encoder
1
1
5
6
2 3
SOURCE
FUNC
2 3
FUNC
SOURCE
5
6
OPEN/CLOSE
OPEN/CLOSE