HP LUN Configuration Manager XP Software - Manual (Page 26)

26 HP StorageWorks LUN Configuration Manager XP: user’s guide
The LUN Management-LDEV Configuration window displays SCSI path
information for the connected disk array and provides access to SCSI path
functions. This window opens at the beginning of LUN management opera-
tions, and also at the end of LUN management operations so you can view
and confirm changes. The following options are accessible from the LUN
Management-LDEV Configuration window:
Option Description
Port button and pull-down
selection box Selects a particular port to display the SCSI path IDs for that port. The infor-
mation can be sorted by numerical order or by type using the SCSI ID, LUN,
or Volume buttons
Volume button and CU and
LDEV pull-down selection
boxes Selects a particular CU and then selects an LDEV within that CU to display
the SCSI path IDs for that volume. If you select this option, only the SCSI
path for that device will be displayed, and the SCSI ID, LUN, and Volume
buttons are unavailable.
Path List box Displays the path configuration for the selected port or volume. A plus sign
next to an LDEV ID (for example, 0:01+) indicates that there is a path to that
LDEV. Two plus signs (for example, 0:01++) indicate that there are multiple
SCSI paths to that LDEV. If there are no plus signs next to the LDEV ID, there
are no SCSI paths defined to that LDEV.
Port SCSI ID, LUN, and
Volume buttons Sorts the path information in different ways for volume view.
Host Mode button Opens the Port Mode Information window to allow you to set the host mode
for one or more ports.
Fibre button Provides access to the Fibre Channel configuration functions.
OpenVOL button Opens the LU Expansion Define window to allow you to create expanded vol-
umes.
Add button Opens the Set LUN Management Parameter window to allow you to create
new paths.
Delete button Opens the Delete LUN Management window to allow you to delete paths.
Cmd.Dev button A toggle switch that allows you to set or unset a volume as a command device
for Command Control Interface operations.
Free SCSI ID and Free Vol-
ume boxes Displays the unassigned SCSI target IDs for the selected port and free LDEVs
in the disk array. The window shows information based on the selected port or
the selected volume.