HP 3PAR Application Software Suite for VMware - Manual (Page 92)

6.10 Unmounting Virtual Copies
3PAR Management Plug-In and Recovery Manager 2.1.0 for VMware vSphere User’s Guide
6.4 Unmounting Virtual Copies
To unmount a previously mounted virtual copy, proceed as follows:
1 Follow the instructions in 6.1 Viewing Virtual Copy Information on page 6.2.
2 Click the Virtual Copies tab.
3 Select the virtual copy you wish to unmount from the Virtual Copy Set list.
4 Right-click the mounted virtual copy in the virtual copy table.
Figure 6-12. Unmounting a Virtual Copy
5 Click Unmount... and then select the host.
NOTE: Recovery Manager for VMware vSphere does not check if the volume
being unmounted is in use. Ensure that the volume is inactive prior to
unmounting.