HP EX475 MediaSmart Server - Manual (Page 16)

Installing Version Update 1.1.1 1-6
Turning on the HP MediaSmart Server
Connect the HP MediaSmart Server to a power source and to a router.
Figure 2: Connecting to power and powering on
To power on the server
1 Plug in. Plug one end of the power cord into the server’s power
receptacle and the other end into an electrical outlet.
2 Connect. Connect one end of the Ethernet cable to the server and the
other end to an available Ethernet port on your router or to a switch that is
connected to your router.
3 Power on. Press the Power button on the back of the server.
The server takes approximately 60 seconds to startup. The indicator lights
blink and change color throughout the startup process. Wait for all of the
server lights to be solid before proceeding with the software installation.
Important: Do not attach USB devices to the HP MediaSmart Server during
initial setup. For additional information, see the Troubleshooting on page 7-1 .