Wheel chocks, Installing the wheel chocks, Chocks – HP Optical Jukeboxes User Manual

Page 31: Figure 1-5 installing the wheel chocks, Repeat step 2 for the remaining three wheels, Installing the wheel chocks -19, Figure 1-5 . installing the wheel chocks -19

Chapter 1

1-19

Setting Up the Jukebox

Installing the Wheel Chocks

Ch
ap
ter
1

: Setti

th
e Disk

Driv

ettin
g

th
e

kebo

Installing the Wheel Chocks

WARNING

This jukebox rolls easily and could cause injury or damage if allowed to move
unintentionally.

Four wheel chocks are provided to stabilize the jukebox in position. Install the
wheel chocks after the jukebox is moved to its operating position and all cables
are in place.

Figure 1-5

Installing the Wheel Chocks

1. After all cables and panels are mounted, roll the unit to its final position.

2. Spread the chock apart slightly and slide it around the bottom of the wheel as

shown on the left side of the figure above.

3. Repeat Step 2 for the remaining three wheels.

NOTE

This is the last step in the physical installation.