HP Photosmart C4270 All-in-One Printer - Manual (Page 106)

Cause: More than one type of paper is loaded in the input tray.
Solution: Load only one type of paper at a time.
Paper is not picked up from the input tray
Cause: There is not enough paper in the input tray.
Solution: If the HP All-in-One is out of paper or there are only a few sheets
remaining, load more paper in the input tray. If there is paper in the input tray, remove
the paper, tap the stack of paper against a flat surface, and reload the paper into the
input tray. To continue your print job, press Start Copy Black on the control panel of
the HP All-in-One.
For more information, see:
“Load full-size paper” on page 21
Print troubleshooting
Use this section to solve these printing problems:
• Envelopes print incorrectly
• Borderless printing produces unexpected results
• The HP All-in-One is not responding
• The HP All-in-One prints meaningless characters
• Nothing happens when I try to print
• The pages in my document came out in the wrong order
• The margins are not printing as expected
• Text or graphics are cut off at the edge of the page
• A blank page came out while printing
• Ink is spraying the inside of the HP All-in-One when I print a photo
Envelopes print incorrectly
Cause: A stack of envelopes is loaded incorrectly.
Solution: Remove all paper from the input tray. Load a stack of envelopes in the
input tray, with the envelope flaps facing up and to the left.
NOTE: To avoid paper jams, tuck the flaps inside the envelopes.
Print troubleshooting 103
Trou
bles
ho
ot
ing