HP Deskjet 970cxi Printer - Manual (Page 29)

22
Using Your Printer Software
2
2
See next page
What do you want to print What you need to do
Transparencies
1 Slide out both of the paper guides, and remove all paper
from the IN tray.
2 Fan the edges of the transparency sheets to separate them,
then align the edges.
3 Insert a stack of up to 30 transparency sheets, rough side
down and the adhesive strip towards the printer.
4 Slide the paper guides snugly against the
transparencies.
5 Choose the print settings that match the type and size of the
transparencies.
6 Print the transparencies.
7 The printer waits for transparencies to dry before releasing
them automatically. Press the Resume Button to continue
printing.
Banners
1 Tear off the number of sheets (up to 20) you need.
2 Tear off and discard the perforated strips, if any.
3 Slide out the paper guides, and remove all paper from the IN
tray.
4 Raise the OUT tray and leave it in the Up position.
5 Put the paper in the IN tray so that the unattached edge is at
the top of the stack. Insert the first edge into the IN tray until
it stops. Make sure the IN tray is pushed in.
6 Slide paper guides snugly against the sheets.
7 Choose the appropriate paper type, size, and orientation.
8 Print the banner.
Posters
1 Load paper in the IN tray.
2 Slide the paper guides snugly against the sheets.
3 Choose the print settings that match the type and size of
your poster.
4 Print your poster.
Adhesive strip