HP StoreFront Mobile Access Software - Manual (Page 24)

• This internal port does not need to be exposed to mobile devices.
Security port. This TCP/IP port is for the operating system login with the Mobility Setup Tool. This
port also provides role-based access features for the Mobility Setup Tool.
• The default port number is 9067.
• This internal port does not need to be exposed to mobile devices.
HP Mobile Gateway service
This HP Mobile Gateway service is accessed by mobile apps. It is the central component that
provides HP 3PAR StoreServ storage information to mobile apps. The service uses the following
ports:
Mobile Access Server port. This TCP/IP port is used by mobile apps to access the HP StoreFront
Mobile Access server.
• The default port number is 9069.
• This external port must be exposed to mobile devices. The HP StoreFront Mobile Access server
installer opens the port in the Windows firewall, but administrators must open the port in
non-Windows firewalls on the server. HP recommends using a VPN to expose the port to mobile
devices that connect from outside of a corporate network. See
“VPN planning” (page 19)
Server Configuration port. This TCP/IP port is used by the Mobility Setup Tool to configure an HP
StoreFront Mobile Access server.
• The default port number is 9070.
• This internal port does not need to be exposed to mobile devices.
HP 3PAR Mobile Content Provider
This service collects information from HP 3PAR StoreServ storage. The services use the following
port:
3PAR Content Provider port. This TCP/IP port is used by the HP Mobile Gateway component to
retrieve the collected storage system information.
• The default port number is 9071.
• This internal port does not need to be exposed to mobile devices.
Changing server port numbers
Port numbers for the server services are established during installation of the server software. When
you run the installer, you can accept the default port numbers or specify port numbers that you
want to use. After installation, you can change port numbers by editing configuration files in a text
editor and restarting the services.
• Port numbers can be from 1024 to 65535.
Install folders
The following procedures refer to the for the HP StoreFront Mobile Access
server. The install folders are:
• Windows 32-bit: C:\Program Files\Hewlett-Packard\HP StoreFront Mobile
Access Server
.
• Windows 64-bit: C:\Program Files (x86)\Hewlett-Packard\HP StoreFront
Mobile Access Server
.
Changing HP MIF for Mobile ports
The HP MIF for Mobile configuration file is xf.cfg.
24 HP StoreFront Mobile Access servers