HP 9250c Digital-Sender - Manual (Page 79)

4. To import your source file into the device, click Browse... next to the Address Book File Name field
on the Import/Export page to browse to the source file on your computer.
5. Click Import to import the data file into the device. The import process will take approximately
1 minute for each 1,000 records, depending on the network speed.
When the import process is complete, a message appears indicating how many records were
successfully imported and whether there were any import errors.
Required data and record limits
The required data for each type of record is as follows:
Record type Required data Maximum field length Maximum records
E-mail address name (or "first name" and "last
name")
address 1
245 characters 2
255 characters
2,000 3
User record name
pin
address 1
245 characters 2
4-8 digits
255 characters
2,000
E-mail distribution list name
address 1
dlname
245 characters 2
255 characters
245 characters 2
2,000 3
Fax number name
faxnumber 1
245 characters 2
50 characters
2,000
Fax speed-dial faxnumber 1
speeddial 4
code 4
50 characters
31 characters
2 digits
100 speed-dials, each with a
maximum of 100 entries
1 The “address” field can also be called “E-mail” or “E-mail Address”. The “faxnumber” field can also
be called “Business Fax” or “Home Fax”.
2 The maximum length might be less, depending on the language being used.
3 The total combined number of e-mail addresses and distribution lists must be 2,000 entries or less.
4 The "speeddial" field contains the name of the speed-dial, for example "Johnson Janitorial", and the
"code" field contains the speed dial code (a number between 0 and 99), for example 08. Either one-
or two-digit numbers are accepted; for example, either 06 or 6 can be used.
Creating an import file using Microsoft Outlook
If you have contacts saved in Microsoft Outlook, you can export them into a .CSV file and then use that
file to import them into the device. Follow these instructions to create a .CSV file using Microsoft Outlook.
1. From the Outlook File menu, choose Import and Export....
2. In the Import and Export Wizard, choose Export to a file and click Next.
3. Select Comma Separated Values (DOS) and click Next.
ENWW Import/Export 69
Digital Send
in
g