HP 9250c Digital-Sender - Manual (Page 13)

NOTE You cannot view the HP EWS screens from outside a firewall.
1. Open a supported Web browser.
2. In the Address or Go to field, type the IPv4 or IPv6 TCP/IP address, the host name, or the
configured host name that is assigned to the product. See the following examples.
● IPv4 TCP/IP address:
http://192.168.1.1
● IPv6 TCP/IP address:
http://[2001:0ba0:0000:0000:0000:0000:0000:1234]
● Host name:
npiXXXXXX
If you do not know the TCP/IP address for the product, you can find it by using the control-panel menu.
For instructions, see the user guide that came with your product.
NOTE The HP EWS for the HP 9250C Digital Sender supports IPv6 on the Information,
Settings, and Networking tabs. However, the Digital Sending tab supports only IPv4 address
configuration.
ENWW Opening the HP Embedded Web Server 3
Overview