HP 9250c Digital-Sender - Manual (Page 20)

Table 2-2 Configuration Page
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web
Server .
2 Device Information Lists the serial number, version numbers, and other information for the
device.
3 Options Lists:
● Version and TCP/IP address for all network devices connected to
the product (Jetdirect or internal Jetdirect)
● Options that are installed in each DIMM slot and EIO slot
● USB devices that can be connected to a device used as a host USB
controller, such as mass storage devices, card swipes, or keypads
4 Memory Lists the memory information, including information about DIMM
memory and on-board memory.
5 Security Lists the status of the control-panel lock, disk write-protect options, and
direct-connect (USB or parallel) ports.
You can change the status of the Direct Connect ports on the Security
screen under the Settings tab by selecting or clearing the Disable
Direct Ports check box.
10 Chapter 2 Viewing product status from the HP EWS Information screens ENWW
Informat
ion