HP 9250c Digital-Sender - Manual (Page 37)

Callout Area on the screen Information or capability that the area provides
5 Send to HP Select this check box to send device configuration and supplies status information
to HP on a regular basis. The information will be sent to an HP e-mail address
(for example, [email protected]) in a text-based file with an .XML file extension.
This file will be created in English.
To view more information about how HP treats the information that is sent by
AutoSend, click Hewlett-Packard Online Privacy Statement.
6 Test Click this button to save your settings and to send the information immediately,
so that you can make sure that the recipient receives the messages.
To turn on the AutoSend feature
Use the following procedure to make the AutoSend feature available.
1. Make outgoing e-mail functions available by following the instructions that are listed in this chapter.
(For more information, see
E-mail Server .)
2. Select the Enable AutoSend check box.
3. Click an option to specify the interval at which you want the product to send the product-
configuration and supplies-usage information to the e-mail recipients (determined in the next step),
and then type the number of days, weeks, months, or pages printed.
4. Configure up to 20 destinations using the format that appears on the screen.
5. To send device configuration and supplies status information to HP, select the Send to HP check
box.
6. Click Apply.
Table 3-5 AutoSend (continued)
ENWW AutoSend 27
Settings