HP ProLiant DL120 G5 Server - Manual (Page 30)

Hardware options installation 30
4. Remove the management port option cover.
5. Using a T-15 Torx screwdriver, install the dedicated LO100c management port module.
6. Install the primary access panel.
7. Install the server into the rack.
8. Connect the dedicated LO100c management port to a LAN from which the server is managed.
9. Connect the AC power cord to the AC power source.
10. Wait 3 minutes for LO100c firmware initialization to complete.
The dedicated LO100c management port supports DHCP-assigned and static IP addresses. To configure
network access, see the HP ProLiant Lights-Out 100 Remote Management User Guide on the HP website
( http://www.hp.com/servers/lights-out ).