HP Officejet Pro 8100 ePrinter - N811a N811d - Manual (Page 82)

5. Make sure the latch handle is raised, and then reinsert the printhead.
6. Carefully lower the latch handle.
NOTE: Make sure you lower the latch handle before reinserting the ink
cartridges. Leaving the latch handle raised can result in incorrectly seated ink
cartridges and problems printing. The latch must remain down in order to
correctly install the ink cartridges.
7. Close the ink-cartridge access door and the top cover.
Clear jams
Occasionally, media becomes jammed during a job.
This section contains the following topics:
•
Clear paper jams
• Avoid paper jams
Clear paper jams
CAUTION: To prevent possible damage to the printhead, clear paper jams as
soon as possible.
TIP: If you notice poor print quality, clean the printhead. For more information, see
Clean the printhead.
Chapter 5
78 Solve a problem