HP ProLiant Support Pack - Manual (Page 30)

Advanced topics 30
Parameter Description Possible values
only.) • NO (do not start the HP
Lights-Out management
driver)
HPVCAVCRMSERVER This parameter informs the VCA of the name of the
VCRM to use as a software distribution repository.
(Applies to Linux PSP only.)
VCRM name
HPVCAVCRMLOGINID This parameter is the login ID that the VCA uses to
communicate with the VCRM. (Applies to Linux PSP
only.)
VCA login ID
HPVCAVCRMLOGINPASSWD This parameter is the password for the login ID
specified in the HPVCAVCRMLOGIN parameter.
(Applies to Linux PSP only.)
VCA login password
FORCE-OVERWRITE This parameter is used by the HP Systems
Management Homepage (hpsmh) to force
overwrite the SMH settings of an existing
configuration file.
YES, NO (default)
ADMIN-GROUP This parameter is used by the HP Systems
Management Homepage (hpsmh) to set up security
for the web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
administrative access to the
web services.
USER-GROUP This parameter is used by the HP Systems
Management Homepage to set up security for the
web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
user-level access to the web
servers.
OPERATOR-GROUP This parameter is used by the HP Systems
Management Homepage to set up security for the
web server. (Applies to Linux PSP only.)
Up to five Linux groups,
separated by spaces or
semicolons, to enable
operator-level access to the
web servers.
ANONYMOUS-ACCESS This parameter determines whether an anonymous
user can access the HP Systems Management
Homepage. (Applies to Linux PSP only.)
YES, NO (default)
IP-BINDING This parameter is used by the HP Systems
Management Homepage to determine whether
hpsmh can use all available NICs and detect
subnets for its web services. (Applies to Linux PSP
only.)
YES, NO (default)
IP-BINDING-LIST This parameter is used by the HP Systems
Management Homepage to restrict the NICs and
subnets to use for its web servers.
The IP-BINDING parameter must be set to yes for
this parameter to be used during installation.
(Applies to Linux PSP only.)
IP address/NetMask pairs
separated by semicolons
(for example,
10.1.1.1/255.255.255.0
;10.2.2.2/255.255.255.
0)
IP-RESTRICTED-LOGINS This parameter is used by the HP Systems
Management Homepage to restrict login access.
(Applies to Linux PSP only.)
YES, NO (default)
To enable restrictions on
who can log in to the web
server, this parameter must
be set to yes, and values
must be provided to the
IP-RESTRICTED-EXCLU
DE or