HP ProLiant DL380e Gen8 Server - Manual (Page 79)

Hardware options installation 79
4. Remove the access panel (on page 23 ).
5. Remove the primary PCI riser cage (" Remove the PCI riser cages " on page 25 ).
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
6. Install the TPM board. Press down on the connector to seat the board (" System board components " on
page 13 ).
7. Install the TPM security rivet by pressing the rivet firmly into the system board.
8. Install the primary PCI riser cage (" Install the PCI riser cages " on page 26 ).
9. Install the access panel (on page 24 ).
10. Install the server into the rack (" Installing the server into the rack " on page 33 ).
11. Power up the server (on page 20 ).