Changing the number of copies – HP LaserJet M1005 Multifunction Printer series User Manual
Page 57
Changing the number of copies
You can choose to have the default number of copies be any number from 1 to 99.
To change the number of copies for the current job
1.
On the device control panel, press
# Copies
.
2.
Use the
<
or the
>
button to adjust the number of copies, and then press
Menu/Enter
.
3.
Press
Start Copy
.
NOTE:
The change in the setting remains active for about two minutes after the copy job has
been completed. During this time, Settings=Custom appears on the device control-panel display.
To change the default number of copies
1.
On the device control panel, press
Menu/Enter
.
2.
Use the
<
or the
>
button to select Copy setup, and then press
Menu/Enter
.
3.
Use the
<
or the
>
button to select Def. # of copies, and then press
Menu/Enter
.
4.
Use the
<
or the
>
button to adjust the number of copies (between 1 and 99) that you want as the
default.
5.
Press
Menu/Enter
to save the selection.
NOTE:
The factory-set default for the number of copies is 1.
ENWW
Changing the number of copies
47