Using the device control panel, Changing the control-panel display language, Changing the default media size and type – HP LaserJet M1005 Multifunction Printer series User Manual
Page 37: To change the default media size
Using the device control panel
You can configure settings at the control panel.
Changing the control-panel display language
Use this procedure to print reports or to show messages on the device control-panel display in a
language other than the default for your country/region.
1.
Press
Menu/Enter
.
2.
Use the
<
or the
>
button to select System setup, and then press
Menu/Enter
.
3.
Use the
<
or the
>
button to select Language, and then press
Menu/Enter
.
4.
Use the
<
or the
>
button to select the language that you want.
5.
Press
Menu/Enter
to save the selection.
Changing the default media size and type
Set the size and type of media that you usually load in the input tray. The device uses these settings for
copying and printing.
To change the default media size
1.
Press
Menu/Enter
.
2.
Use the
<
or the
>
button to select System setup, and then press
Menu/Enter
.
3.
Use the
<
or the
>
button to select Paper setup, and then press
Menu/Enter
.
4.
Use the
<
or the
>
button to select Def. paper size, and then press
Menu/Enter
.
5.
Use the
<
or the
>
button to select the size.
6.
Press
Menu/Enter
to save the selection.
ENWW
Using the device control panel
27