Physical specifications, Electrical specifications, Power consumption – HP LaserJet M1005 Multifunction Printer series User Manual
Page 122: Environmental specifications, 112 appendix c device specifications enww
Physical specifications
Table C-1
Physical specifications
Height
Depth
Width
Weight
308 mm (12.13 inches)
363 mm (14.3 inches)
437 mm (17.2 inches)
8.3 kg (18.4 lb)
1
Weight does not include print cartridge, which weighs 0.7 kg (1.5 lb).
Electrical specifications
CAUTION:
Power requirements are based on the country/region where the device is sold. Do not
convert operating voltages. This will damage the device and void the product warranty.
Table C-2
Electrical specifications
Item
110-volt models
220-volt models
Power requirements
110 to 127 V (+/- 10%)
XX / XX Hz (+/- 2 Hz)
220 to 240 V (+/- 10%)
XX / XX Hz (+/- 2 Hz)
Rated current
X.X A
X.X A
Power consumption
Table C-3
Power consumption (average, in watts)
Printing
Copying
Off
XXX W
XXX W
X W
0 W
1
Values are based on preliminary
for current information.
2
Power reported is highest values measured for monochrome printing/copying using all standard voltages.
3
The default time from Ready mode to Sleep mode and the recovery time from Sleep mode to start of printing is less than 10
seconds because of instant-on fusing.
4
Maximum heat dissipation for all models in Ready mode = 51.2 BTU/hour.
5
Print speed is 15 ppm letter-size and 14 ppm A4-size.
Environmental specifications
Table C-4
Environmental specifications
Recommended
Operating
Storage
(Device and print cartridge)
Temperature
XX° to XX°C
(XX° to XX°F)
XX° to XX.X°C
(XX° to XX.X°F)
X° to XX°C
(XX° to XXX°F)
Relative humidity
XX% to XX%
XX% to XX%
X% or less
1
Values are subject to change. See the support Web sites listed in
for current information.
112 Appendix C Device specifications
ENWW