Snmp panel (system), System ethernet panel, Figure 9 – HP SAN Virtualization Services Platform User Manual

Page 76

Text mode
Original mode

Figure 9 System Ethernet panel

An amber LED indicates that the corresponding component is missing, has failed, or will likely fail
soon. Even if your DPMs appear to be performing normally, replace the part if the corresponding LED
has turned amber.

SNMP panel (system)

Figure 10

shows the SNMP panel. This panel allows SNMP v2 or v3 to be enabled or disabled. A

trap receiver can also be specified that will receive SNMP trap events from the DPM, if not enabled
during the initial installation.

Using the Data Path Module management GUI