HP SAN Virtualization Services Platform - Manual (Page 52)

Shows cumulative system debug information.
[fcptstate]
Provides the state of the SCSI target driver.
[fcsdb]
Shows information about the Fibre Channel ports and SCSI LUNs visible to the DPM.
[fcsexch]
Provides per port Fibre Channel Services (FCS) exchange allocation diagnostic. Used by support
personnel.
[fcsluns]
FCS LUN discover. Local port database of remote ports with LUNs per remote port.
[fcsstate]
Provides a summary table showing how many targets, LUNs, and initiators are discovered by each
port. Each port discovers itself.
[fpsdiag]
Shows firmware debugging information.
[fpskdstats]
Shows fastpath activity per virtual disk exposure on the DPM.
[fpspsc]
Provides a list of the physical disks in use by the firmware/fastpath.
[fpsstats]
Shows the firmware/fastpath statistics.
[hwstate]
Provides the state of the HBA hardware driver.
[interrupts]
Shows interrupt load.
[kdisks]
Shows the virtual disks created by the application, remote initiator WWN, port WWN, LUN identifier,
current state, type, and handle.
[kdstats]
Shows virtual disk I/O statistics, such as number of forwarded commands and the number of reads
handled by the DPM software.
[kmodules]
Provides a list of loaded kernel modules, the same as “modules.”
[levels]
Provides the definitions of the debug levels settable by the set debug command.
[meminfo]
Shows memory usage.
CLI commands 52