HP SAN Virtualization Services Platform - Manual (Page 64)

Show telnet
command
Enables use of the telnet application to connect to the DPM CLI.
Syntax
show telnet
See also
“ Disable telnet command ” on page 26
“ Enable telnet command ” on page 31
Show therm
command
Returns the status, current temperature in Celsius and Fahrenheit, and the minimum and maximum
thresholds for the specified thermometer. The DPM has six thermometers.
Syntax
show therm
[therm number]
*
Keyword values
therm number
An integer between 1 and 6, inclusive.
* indicates all thermometers in the DPM.
See also
“ Show therms command ” on page 64
Show therms
command
Returns the status, current temperature in Celsius and Fahrenheit, and the minimum and maximum
thresholds for each of the six thermometers in the DPM.
Syntax
show therms
See also
“ Show therm command ” on page 64
CLI commands 64