HP SAN Virtualization Services Platform - Manual (Page 11)

2 Using the command line interface
This chapter describes the use of the HP StorageWorks SAN Virtualization Services Platform Data
Path Module (DPM) command line interface (CLI). You can configure and manage the DPM with these
common command sets that provide the same functions as the DPM GUI.
CLI overview
The DPM provides a command line user interface through serial, telnet, and ssh connections with
serial being the preferred default. All configuration, maintenance, and monitoring of the DPM is
performed through the CLI.
Command quick reference by object
Table 1 shows which commands are available for the major object types.
Table 1 Commands by object type
Page Command Object type
22 Disable eth command
eths
27 Enable eth command
36 Modify eth command
47 Set eth command
54 Show eth command
55 Show eths command
24 Disable port command
ports
29 Enable port command
38 Modify port command
39 Modify ports command
44 Reset port command
59 Show port command
60 Show ports command
19 Create user command
users 22 Delete user command
26 Disable user command
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 11