HP SAN Virtualization Services Platform - Manual (Page 39)

type [port name]
UNKNOWN, AUTO, FABRIC, LOOP
FABRIC:
the port functions only in conjunction with a single-attached device that is capable
of fabric mode operation. The default is fabric mode, with the fabric yielding better throughput,
and links recover more quickly.
NOTE:
Only the FABRIC port name is supported with the HP StorageWorks SAN Virtualization Services
Platform.
Notes
You must restart the system for port capability or port speed changes to take effect.
maxframesize is not a keyword for this command because all ports must share the same frame
size. See the Modify ports command.
See also
“ Disable port command ” on page 24
“ Enable port command ” on page 29
“ Modify ports command ” on page 39
“ Reset port command ” on page 44
“ Show port command ” on page 59
“ Show ports command ” on page 60
Modify ports
command
Changes the specified keywords—type, capability, speed—for all DPM ports.
Syntax
modify ports
type [port type]
capability [port capability]
speed [port speed]
maxframesize [size (in bytes)]
Keywords and values
At least one of the optional keywords is required:
type [port type]
FABRIC:
the port functions only in conjunction with a single-attached device that is capable
of fabric mode operation. This is the default and the only supported mode.
capability [port capability]
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 39